Series SNC-300 detector incorporates well proven sensing technologies, together with advances in materials and electronics technology, and represents the pinnacle of fire detector performance and reliability.
Series SNC-300 detector has an extra areola to improve detector identification in an alarm condition, so polished and advanced design allow an alarm to be observed from all angles.
The detector will work with most modern fire alarm control panels, and meets the requirements of UL 268 and EN 54-7.
* SNC-300-CL
2-Wire Combined Smoke and Heat Detector with Remote Indicator
Model SNC-300-CL detectors which provide fast and reliable response for photoelectric smoke and heat 57ºC(135ºF) detection. While the smoke and heat detection circuits operate independently, their outputs being "OR' connected, and provide the fire detection performance by acting as a smoke sensor and/or a 57ºC(135ºF) heat detector at the same location.
The detector may work with most modern fire alarm control panels, and can be installed with the series 65 of Apollo together\also the FEOE 2000 of ZETA etc.
Features:
1) 2-Wire operation
2) Optical & thermal detection
3) Wide operating voltage
4) Advanced electronic technology
5) Proven detection performance
6) Designed to meet approvals worldwide (e. G. UL LPCB CE)
7) Sensor base: Optional installation mode. (e. G. Apollo's wiring mode)
MODEL |
SNC-300-CL |
DETECTOR CLASS |
Combined Smoke and Heat |
SUPPLY WIRING |
2 - WIRE |
DESIGN STANDARD |
EN 54-5/7 and UL 521& 268NDnsensitivet)articles (0.5 to 10 mt furnishings, PVC, plastic, foam, and e alarm signaling systems. ics technolgogy.
|
APPROVAL |
CE; LPCB and UL Pending |
SUPPLY VOLTAGE |
9 to 33V DC |
QUIESCENT CURRENT |
60μ A @24V |
ALARM CURRENT |
50mA@24V |
TEMPERATURERANGE |
-20º C to +60º C |
HUMIDITY |
0% to 95% RH No Condensation |
SENSITIVITY |
UL: 2.3%FT; EN 54: 0.15dB/m; |
IP RATING |
IP 43 |
START-UP TIME |
10 Seconds |
DIMENSIONS (dia. x height) |
102 x 56mm (with Base) |
WEIGHTS |
130g(with Base) |